home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Library
/
RoseWare - Network Support Library.iso
/
mhs
/
nacsre.txt
< prev
next >
Wrap
Text File
|
1993-04-23
|
966b
|
43 lines
NACSRE.TXT
DOCUMENT ID#: TD.S.NACS08
PRODUCT: NACS
PRODUCT VERSION: 3
NOTE: These directions are based on the assumption that you are using Communications
Executive 1.2 (COMMEXE.NLM 1.02). If you are using Communications Executive 1.3 see
TD.S.NACS09.
Every time you:
- change the addresses/switch settings on a NACS multiport communications adapter, or
- add, or remove, another communications adapter
you must "reset".
The reset instructions in the "Guide" are not accurate.
The correct instructions to reset are:
1. Make certain no one is currently using the NACS.
2. Exit the NACS console.
3. At the CS prompt
- CSUNLOAD NACS
- CSDOWN
4. At the NetWare 3.11 console
- UNLOAD COMMEXEC
- UNLOAD the AIO driver (WNIM, Digi, Newport, etc)
5. Copy NACSPORT.CFG from the original product diskette.
6. LOAD the AIO driver(s)
7. LOAD COMMEXEC
8. CSLOAD NACS
With holes
our staff